Kilns, Potters Weels, Glazes, Enamels and Potteries Supplies from Potters Connection
 
pottery supplies pottery supplies pottery supplies pottery supplies pottery supplies
pottery supplies
 
Shop Navigation

Potters Wheels and Machinery

A high quality range of Pottery workshop machinery, chosen for it's relaibility and build quality.

<<prev | 1 | 2

Potters Wheel - 10
Potters Wheel - 10" Wheelhead, ¼ hp Motor Bench Wheel Fully Portable ex tax£599.00 inc tax £718.80 Quantity: 
STUDENT Potters Wheel - 10" Wheelhead, ¼ hp Motor Bench Wheel Fully Portable
Potters Wheel - 10
Potters Wheel - 10" Wheelhead, 1/3 hp Motor Bench Wheel Fully Portable, Reversible POA
CRAFTSMAN Potters Wheel - 10" Wheelhead, 1/3 hp Motor Bench Wheel Fully Portable, Reversible
Please phone 01782 598729 for more details.
Storage ex tax£0.00 inc tax £0.00 Quantity: 
DAMPANDDRYINGCABINETS A UK manufactured range of Damp Cabinets and Drying Cabinets for either keeping greenware moist as a work in progress, or for drying gradually. These Cabinets are ideal for the studio or Educational establishment. The Damp Cabinets will keep pieces wet over night so that they can be worked on at a later date.Rubber door seals keep the moisture trapped in the cabinet.

The drying Cabinets are exactly the same visually, but have heating elements strategically placed for optimum heat circulation.

Shelves supplied internally adjustable

Storage Equipment - Damp Cabinet 2 feet deep
Storage Equipment - Damp Cabinet 2 feet deep ex tax£464.40 inc tax £557.28 Quantity: 
5623 The ideal way to store semi damp greenware and to retain the dampness. Fitted with an air-tight rubber seal, moisture is retained within the cabinet, so the piece retains itsí workability. Fitted with lockable doors supplied with two keys.

Four shelves supplied, but extra shelves can be bought seperately


Dimensions 1270mm High x 915mm Wide x 635 mm Deep (Front to Back)

Damp Cabinet
Damp Cabinet ex tax£530.00 inc tax £636.00 Quantity: 
5624 The ideal way to store semi damp greenware and to retain the dampness. Fitted with an air-tight rubber seal, moisture is retained within the cabinet, so the piece retains itsí workability. Fitted with lockable doors supplied with two keys.

Model shown is 5625 , so smaller Damp Cabinets will be lower.

Dimensions

1270 High x 1220 Wide x 635 Deep

Damp Cabinet ex tax£740.00 inc tax £888.00 Quantity: 
5625 The ideal way to store semi damp greenware and to retain the dampness. Fitted with an air-tight rubber seal, moisture is retained within the cabinet, so the piece retains itsí workability. Fitted with lockable doors supplied with two keys.

Dimensions

1830 High x 1220 Wide x 635 Deep

Drying Cabinet
Drying Cabinet ex tax£1230.00 inc tax £1476.00 Quantity: 
5626 The ideal way to dry semi damp greenware and to achieve the sure dryness neede for firing/decoration.

Removable mesh type shelves

Fitted with lockable doors supplied with two keys.

230Volt Single Phase supply required

Ceramic heater, totally safe

Dimensions

1270 mm x 915mm x 635Deep

Drying Cabinet
Drying Cabinet ex tax£1760.00 inc tax £2112.00 Quantity: 
5627 The ideal way to dry semi damp greenware and to achieve the sure dryness neede for firing/decoration.

Removable mesh type shelves

Fitted with lockable doors supplied with two keys.

230Volt Single Phase supply required
Ceramic Heater totally safe and guarded from droppages within the cabinet.
Dimensions

1830 mm x 1220mm x 635Deep

High Speed Glaze Mixer & Bucket
High Speed Glaze Mixer & Bucket ex tax£380.00 inc tax £456.00 Quantity: 
5300 If you wish to save time on mixing glazes,then this is the machine you require. Manufactured in aluminium to give no possibility of glaze contamination whilst mixing. Supplied complete with 25 Litre bucket and lid, (available as a spare- cat no. 5603). Simply plugs into a conventional 13 amp socket, although the use of the RCD Trip installed in the socket is recommended to avoid any electrical problems should spillage occur. The mixer will sit at the bottom of most containers, sidewall length permitting, as the rotating blade has clearance from the absolute bottom of the mixer vanes.

Weight 16 Kilos

25 Gallon Blunger (120 litres)
25 Gallon Blunger (120 litres) ex tax£1900.00 inc tax £2280.00 Quantity: 
5514 Available in two sizes with the design and manufacturing processes being the same. The tank is manufactured with GRP (fibreglass) to eliminate contamination. The shaft and blades are made from Stainless Steel. Drive is via double vee-belt and pulley arrangement. Outlet is a rigid plastic 1' BSP ball valve.
STAND IS A OPTIONAL EXTRA
Slab Roller (working area 700 x 950 mm)
Slab Roller (working area 700 x 950 mm) ex tax£900.00 inc tax £1080.00 Quantity: 
5511 Made to our specifications, this piece of workshop equipment is built to last a lifetime. Fully galvanised so no rust problems. Fine adjustment of the slab thickness across the whole area with a very powerful geared drive, with FOUR drive gear cogs, to make light work of rolling slabs of clay. Available in either bench format (190mm High) or free-standing. Left or Right hand operation of the Roller. Complete with cloths.

Overall Dimensions

5511 Length 1200mm x 760mm Wide x 960mm High (on Legs)

Stand for Blungers ex tax£125.00 inc tax £150.00 Quantity: 
5515 Stand for Blungers
SHIMPO WHEEL RK3E
SHIMPO WHEEL RK3E ex tax£1234.00 inc tax £1480.80 Quantity: 
RK3E THE ALL NEW SUPER QUIET AND SUPER POWERFUL (75KGS THROWING CAPACITY)FROM THE WORLD REKNOWNED SHIMPO COMPANY.

THIS WHEEL HAS TO BE HEARD (30Decibels-normal conversation is 85 decibels !) AND TRIED TO BE BELEIVED. YOU CAN THROW UPTO 75 KILOS OF CLAY WITH EASE AND YOU CANNOT HEAR THE MACHINE ITSELF.

iT CAN BE EITHER A BENCH WHEEL OR CONVENTIONAL WHEEL AS THE LEGS DETACH, SO IS IDEAL FOR DEMONSTRATORS OR TEACHERS.

IT HAS A TWO YEAR LIMITED WARRANTY. THE FIRST YEAR IS FULL, THE SECOND PARTS ONLY.

Motor: 1/2hp 400w,AC230v Direct Drive.

14 inch wheelhead

SHIMPO RK55
SHIMPO RK55 ex tax£699.00 inc tax £838.80 Quantity: 
RK55 AN ALL NEW WHEEL FROM SHIMPO

Dimensions-

572mm x 730mm x 546mm (high)

300mm Wheelhead

Weight 23 Kilos

1/8 HP 100w Motor

0/250 rpm

IT HAS A TWO YEAR LIMITED WARRANTY. THE FIRST YEAR IS FULL, THE SECOND PARTS ONLY

Shimpo Wheel RK3D
Shimpo Wheel RK3D ex tax£1093.00 inc tax £1311.60 Quantity: 
RK3D Super quiet, takes massive amounts of clay. Fixed pedal. Can be used as a whirler because the wheelhead freewheels when not in use.An amazing low cost wheel, powerful and quiet -30 Decibels!

Features.

Motor : 1/2hp 400w, AC230V, 50Hz

Direct Drive with protected overload.

IT HAS A TWO YEAR LIMITED WARRANTY. THE FIRST YEAR IS FULL, THE SECOND PARTS ONLY

SHIMPO BAT WHEEL HEAD
SHIMPO BAT WHEEL HEAD ex tax£220.00 inc tax £264.00 Quantity: 
SHIMPOESYLIFT An ingenious way of increasing production. Simply replace your existing wheel head with this wheelhead. Throw your pot directly onto the batt, and then lift batt and piece off. Replace with a new batt and throw a new piece, and so on.

Wheel head comes with one batt. Others are available.-

This model is specifically for SHIMPO WHEELS.
For spare batts see 5102 Batt

BAILEY WHEEL
BAILEY WHEEL ex tax£965.00 inc tax £1158.00 Quantity: 
BAILEY At last a UK manufactured equivalent to the Shimpo.

Superbly engineered with optional full size legs.TWO Year Warranty

Quiet, with remote foot pedal. An excellent wheel for Professional or Hobby potter alike

SHIMPO BENCH WITH PEDAL
SHIMPO BENCH WITH PEDAL ex tax£590.00 inc tax £708.00 Quantity: 
RK5BENCHFOOTPEDAL EAGERLY AWAITED!!!

NOW FITTED WITH FOOTPEDAL.

The popular Bench Wheel from shimpo with a footpedal.Another excellent Potters Wheel from Shimpo. As you would expect it is superb quality and extremely practical.

Lightweight compact design making it extremely portable.

Ten kilo centring capacity make it a valuable addition to the studio or classroom

Includes splashpan and two batts.

Speed Control- Footpedal

Wheelhead Diameter 178mm

Direction Forward /Reverse

Overall Weight 12kg

IT HAS A TWO YEAR LIMITED WARRANTY. THE FIRST YEAR IS FULL, THE SECOND PARTS ONLY

Alsager Wheel
Alsager Wheel ex tax£1700.00 inc tax £2040.00 Quantity: 
ALSAGER The famous Alsager wheel.

This wheel is probably one of the most popular wheels used by professionals and colleges.

A close relation of the G30 Wheel built to the same exacting standards but with a slightly less powerful motor (similar to G35)

Motor; 0.5hp

Wheelhead 12"

Dimensions 680mm wide x 820mm high x 1000mm Long

Frema Bench Wheel
Frema Bench Wheel ex tax£475.00 inc tax £570.00 Quantity: 
PWDCT REMA PW-DCT Table Top Wheel with Foot Pedal and optional legs( LEGS ONLY ADD APPROX 8 INCHES)

W444 x L 660. Body and splashpan 300mm tall, optional legs add 200mm approx.

12" Alloy reversible wheelhead

0.33 Hp, 250 W, DC motor with 13 amp plug fitted.

Robust foot pedal operated portable wheel with good torque at a bargain price

LEGS FOR PW DCT ex tax£35.00 inc tax £42.00 Quantity: 
PWDCTLEGS Set of four legs for Frema Bench Wheel

Legs add 200mm only

FREMA PW-DC-AH
FREMA PW-DC-AH ex tax£725.00 inc tax £870.00 Quantity: 
FREMAWHEEL FREMA PW-DC-AH Adjustable Height ¾ HP Wheel with Foot Pedal

W670 x L 730 mm, Height Adjustable up to 630mm - good for adults and school use .

13.5" Alloy reversible wheelhead with removable lugs for batts

0.75 Hp, 550 W, DC motor with 13 amp plug fitted.

SLABROLLERS ex tax£0.00 inc tax £0.00 Quantity: 
SLABROLLERS The range of Slabrollers have been designed to provide an extremely efficient and reliable method of producing slabs of clay for hand building or producing tiles.

They been designed using vast experience in slabroller production and incorporates arack and pinion drive system eliminating the need of maintenance from troublesome wire driven systems, the design allows for infinitely variable thickness of clay to be rolled by means of adjustment of the main roller using a simple threaded adjuster that allows for fine accurate adjustment whilst keeping the equal distance above the table across its length.

The large single roller is made of a rust proof material to avoid corrosion or contamination of the clay.

The smaller size slabroller has fully collapsible legs so it can be easily transported and comes complete with a set of high quality rolling cloths , additional cloths can be purchased

Slabroller 3 foot Bench
Slabroller 3 foot Bench ex tax£925.00 inc tax £1110.00 Quantity: 
3FOOT Specifications
Delivery Weight: 60kg
Construction:Heavy duty fabricated steel frame with Aluminium Main roller
Fully Collapsible Legs

Finish:Durable powder coated finish

Dimensions : 920 long x 820 wide x 1090 mm high
Clay Weight 60 Kilos Clay
Slab size 720mm x 470mm wide Max thickness 25mm
Bench mounted : 920 long x 820 wide x 470 mm high Weight 50 Kilos Clay Slab size 720mm x 470 mm wide Max thickness 25mm
Options extras:Additional cloths

4 foot
4 foot ex tax£999.00 inc tax £1198.80 Quantity: 
SLABROLLER4FOOT Specifications
Delivery Weight: 70kg
Construction: Heavy duty fabricated steel frame
Aluminium Main roller

Finish: Durable powder coated finish

Dimensions :1220 long x 820 mm wide x 1090mm high
Weight 70 kilos

Clay slab size 1020 mm x 470 mm Max thickness 25mm

Options extras: Additional rolling cloths

Shimpo Batt Benchwheel ex tax£6.30 inc tax £7.56 Quantity: 
5119 6mm Marine Plywood To fit Shimpo BENCH Wheels.

Replaces plastic batt as supplied by Shimpo.

6mm Waterproof MDF pre drilled, so direct replacement

 

Back to Top