Potters Wheels and Machinery

A high quality range of Pottery workshop machinery, chosen for it's relaibility and build quality.

<<prev | 1 | 2 | 3 | 4

High Speed Gaze Mixer & Bucket £263.54 Quantity:

5300 If you wish to save time on mixing glazes,then this is the machine you require. Manufactured in aluminium to give no possibility of glaze contamination whilst mixing. Supplied complete with 25 Litre bucket and lid, (available as a spare- cat no. 5603). Simply plugs into a conventional 13 amp socket, although the use of a RCD Trip installed in the socket is recommended to avoid any electrical problems should spillage occur. The mixer will sit at the bottom of most containers, sidewall length permitting, as the rotating blade has clearance from the absolute bottom of the mixer vanes. Weight 16 Kilos

15 Gallon Blunger (70 litres) £1100.00 Quantity:

5513 Available as stated, in two sizes with the design and manufacturing processes being the same. The tank is manufactured from 2mm steel which is the lined with GRP (fibreglass) to eliminate contamination. The shaft and blades are made from Stainless Steel. Drive is via double vee-belt and pulley arrangement. Outlet is a rigid plastic 1' BSP ball valve. Available without stand if not required.

Slab Roller (working area 480 x 950 mm) £800.00 Quantity:

5510 Made to our specifications, this piece of workshop equipment is built to last a lifetime. Fully galvanised so no rust problems. Fine adjustment of the slab thickness across the whole area with a very powerful geared drive, with FOUR drive gear cogs, to make light work of rolling slabs of clay. Available in either bench format (190mm High) or free-standing. Left or Right hand operation of the Roller. Complete with cloths. Overall Dimensions 5510 Length 1200mm x 590mm Wide x 960mm High (on Legs)

25 Gallon Blunger (120 litres) £1410.00 Quantity:

5514 Available as stated, in two sizes with the design and manufacturing processes being the same. The tank is manufactured from 2mm steel which is the lined with GRP (fibreglass) to eliminate contamination. The shaft and blades are made from Stainless Steel. Drive is via double vee-belt and pulley arrangement. Outlet is a rigid plastic 1' BSP ball valve. Available without stand if not required.

Slab Roller (working area 700 x 950 mm) £865.00 Quantity:

5511 Made to our specifications, this piece of workshop equipment is built to last a lifetime. Fully galvanised so no rust problems. Fine adjustment of the slab thickness across the whole area with a very powerful geared drive, with FOUR drive gear cogs, to make light work of rolling slabs of clay. Available in either bench format (190mm High) or free-standing. Left or Right hand operation of the Roller. Complete with cloths. Overall Dimensions 5511 Length 1200mm x 760mm Wide x 960mm High (on Legs)

Back to Top

The Potters Connection Ltd (Company No 06404315)
Stoke-on-Trent, England
Tel: 01782 598729
Fax: 01782 765833
SALES TEAM sales@pottersconnection.co.uk